Page 215 - Rigging and Accessories Guide (2022) - 8M0187689
P. 215

ELECTRICAL



            DUAL STATION SENDERS                                     8M0078892                              37.75
                                                                3 ft.(910 mm) harness connects in place of ignition switch.
                                                                Used on Outboard installations that have Mechanical Non DTS
            Replaces factory installed sender on engine. For use with dual station  requirements for Remote Start/Stop.  Uses 6 Pin connection and  services
            instrumentation.                                    second station installations.  Similar to 76426A 9 MCM version.

            ENGINE OIL PRESSURE SENDER
                                                                LANYARD STOP SWITCHES

                                                                Lanyard cord attaches to the toggle switch or cap and boat driver. When
                                                                switch toggles or cap pulls off switch, the ignition is interrupted and the
                                                                engine shuts down.

                                                                LANYARD STOP SWITCH



                  37293T                               118.65
            Fits MCM/MIE gasoline engines
            ENGINE WATER TEMPERATURE SENDER


      ELECTRICAL   49734                                52.15      87- 19674A07                             27.88


                                                                       WARNING: Cancer - www.P65Warnings.ca.gov
            For dual station installations, used for temperature gauge
            Fits MCM/MIE engines                                5 ft.(1.53 m) harness.  Surface or Flush mount.   Used when mounting
                                                                controls with no lanyard switch included
            ENGINE OIL PRESSURE SENDER                          Used on Outboards and DTS engines
                                                                LANYARD STOP SWITCH











              87-805268                                 23.70
            For dual station installations                         87- 19674A08                             29.71
            Fits 1994 and newer MCM/MIE Diesel engines
                                                                       WARNING: Cancer - www.P65Warnings.ca.gov
                                                                5 ft.(1.53 m) harness.  2 inch cut out with Black bezel.  Used when
            TWO STATION START/STOP PANELS                       mounting controls with no lanyard switch included.
                                                                Chrome bezel optional ‑ order separate.
            Mounts in a 3‑3/8 in.(86 mm) hole.                  Used on Outboards and DTS engines
                                                                LANYARD STOP SWITCH - DUAL FLUSH MOUNT
            TWO STATION START/STOP PANEL











                                                                   87-814324A 2                             47.18
                  76426A 9                              74.30          WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
                   WARNING: Cancer - www.P65Warnings.ca.gov     Dual engine kit. 5 ft.(1.53 m) harness. Surface mount or flush mount.  Used
            3 ft.(910 mm) harness connects in place of ignition switch.  when mounting controls with no lanyard switch included
            Fits MCM/MIE gasoline Carb engines (0W650000 and below).  Used on Non DTS MCM/MIE Engine ‑ See 87‑19674A12 and A13 for
                                                                OB/DTS Installations




            202                                                 Place Orders | Print Invoices | Register Product | Pay Online
   210   211   212   213   214   215   216   217   218   219   220