Page 138 - Mercury Service Tool Guide (2020) - 8M0163249

FOURSTROKE V6 AND V8 MODELS

RING INSTALLER TOOL BEARING MANDREL

91-8M0039309 91-8M0142636
Installs torpedo ring Used to press gear out of bearings and cone.
5.44" gear housing
REAR GEAR BEARING CONE MANDREL
BEARING CARRIER GUIDE PLATE

91-8M0142413 FOURSTROKE V6 AND V8 MODELS
91-8M0142624 Used to press in the rear gear bearing cones.
Aids in the installation of bearing carrier seals and propeller shaft tapered bearing
race. PRELOAD DRIVER ALIGNMENT TOOL
PRESS SPACER MANDREL

91-8M0142970
Aligns bearings and spacers during press and torque actions.
THREADED SHAFT BEARING CARRIER ASSEMBLY
TOOL
91-8M0142983
Holds bearing carrier upright and aids in turning rear gear bearing assembly.
PRESS FIXTURE BASE TOOL
91-8M0142976
91-8M0142615 Holds threaded shaft tool and secures bearing carrier to prevent movement when
Used to hold bearing carrier and universal puller plate on a press. pressing rear gear bearing assembly into the bearing carrier.
GEAR ASSEMBLY HOLDING FIXTURE THREADED CLUTCH ASSEMBLY TOOL
91-8M0145393
Engages with clutch jaws to rotate the gear as it is being pressed into the bearing
carrier.
DRIVEN GEAR BEARING

91-8M0142559
Insert into vise to hold forward (rear) gear.
RETAINING NUT TOOL
31-861792
Fits Bravo I, II, III, X, XR & XZ (s/n 0M100001 and above) (2000 & newer); New
4.6L V8 4‑stroke
91-8M0070085
Installs locknut onto forward gear hub

Mercury Service Tool Guide 131