Page 8 - LFC Catalogue metalworking

Vector VM2030 - Ultrasonic Dot Pen Marking

The Japan made Vector VM2030 uses ultrasonic power to vibrate the marking stylus.
Simply plug in electric power and no air supply is needed to do marking.

metalworking
The ultrasonic pen vibrates the stylus by 50,000Hz ultrasonic (50,000 times per second).
As the frequency is out of human’s audible range, you will feel the dierence in lower noise
and ner nish when compared to both air pen models and electromagnetic pen models.
Features:

+ Electric powered, highly ecient and environment friendly.
+ All connectors, buttons and indicators are arranged on the front panel of
control unit, it is very easy to install and maintain.
+ 2D code marking (DataMatrix / QR Code / Micro QR Code)
+ Can be operated by both input panels and PC connectivity through USB port
and PLC.
+ Generate 70dB of noise, much lower compared to pneumatic machines.
+ Economical for both mass production and one o barcode marking.

Front panel I/O Ports
Tech Specication:

Marking range 80×30 mm
Pen stroke Approx. 7mm (Z-axis marking range: 5mm)
Workpiece Steel, aluminum, copper and their alloys, stainless steel, hard plastic, etc.
material (depends on the type of stylus)
Available
characters Alphabet (uppercase/lowercase), number, symbol (18 types)
Character size 0.5~30mm (in increments of 0.5mm)
Font 3 types
Character 8 directions
orientation
Number of jobs 255 jobs (J1~J255)
Number of 255 sequences (S1~S255)
sequences
String length 1~36 characters (varied by character size)
Increment: 1~10 digits
Calendar: Year. Month. Day. Hour. Minute. Second Handheld controller input
Marking function Circular arc marking: Available
Special character: Supported (16 types)
2D code: DataMatrix, QR Code, Micro QR Code
I/O(Parallel): 50pin, NPN connect
Interface RS-232C (Serial): 9pin
USB (for operation by PC): USB 2.0 Standard-B
Single-phase AC100V~230V
Power supply
50 / 60 Hz, Approx. 220VA

052 www.lfc.com.sg